Appendix EFurther Reading
The books, papers, datasets and tools behind the tutorial, grouped by topic, with a word on what each is good for. The numbers are those of the References page.
E.1Start here
Webster’s Medical Instrumentation is the classic text on biopotentials, electrodes and instrumentation; Yazicioglu, Van Hoof and Puers treat biopotential readout circuits for portable systems in depth; Sarpeshkar covers ultra-low-power bioelectronics from devices to systems.
- [7] John G. Webster. Medical Instrumentation: Application and Design, 4th edition. Wiley, 2010.
- [8] Refet Firat Yazicioglu, Chris Van Hoof and Robert Puers. Biopotential Readout Circuits for Portable Acquisition Systems. Springer, 2009.
- [12] Rahul Sarpeshkar. Ultra Low Power Bioelectronics: Fundamentals, Biomedical Applications, and Bio-Inspired Systems. Cambridge University Press, 2010.
- [33] Ramon Pallàs-Areny and John G. Webster. Sensors and Signal Conditioning, 2nd edition. Wiley, 2001.
E.2Signals and electrodes
The origin of biopotentials, from the action potential to extracellular fields, and the electrode interface as a circuit (Chapters 2 and 3).
- [35] Alan L. Hodgkin and Andrew F. Huxley. “A quantitative description of membrane current and its application to conduction and excitation in nerve.” The Journal of Physiology, 117(4):500–544, 1952.
- [36] György Buzsáki, Costas A. Anastassiou and Christof Koch. “The origin of extracellular fields and currents—EEG, ECoG, LFP and spikes.” Nature Reviews Neuroscience, 13:407–420, 2012.
- [37] Patrick E. McSharry, Gari D. Clifford, Lionel Tarassenko and Leonard A. Smith. “A dynamical model for generating synthetic electrocardiogram signals.” IEEE Transactions on Biomedical Engineering, 50(3):289–294, 2003.
- [38] J. E. B. Randles. “Kinetics of rapid electrode reactions.” Discussions of the Faraday Society, 1:11–19, 1947.
- [19] Yu Mike Chi, Tzyy-Ping Jung and Gert Cauwenberghs. “Dry-contact and noncontact biopotential electrodes: methodological review.” IEEE Reviews in Biomedical Engineering, 3:106–119, 2010.
E.3Interference, safety and standards
Mains coupling, the right-leg drive and the CMRR of real front-ends; shielding and guarding; and the IEC 60601 family, which the tutorial summarises but never reproduces (Chapters 4 and 12).
- [21] James C. Huhta and John G. Webster. “60-Hz interference in electrocardiography.” IEEE Transactions on Biomedical Engineering, BME-20(2):91–101, 1973.
- [20] Bruce B. Winter and John G. Webster. “Driven-right-leg circuit design.” IEEE Transactions on Biomedical Engineering, BME-30(1):62–66, 1983.
- [16] Ramon Pallàs-Areny and John G. Webster. “Common mode rejection ratio in differential amplifiers.” IEEE Transactions on Instrumentation and Measurement, 40(4):669–676, 1991.
- [18] Enrique M. Spinelli, Ramon Pallàs-Areny and Miguel A. Mayosky. “AC-coupled front-end for biopotential measurements.” IEEE Transactions on Biomedical Engineering, 50(3):391–395, 2003.
- [47] Alan Rich. “Shielding and guarding: how to exclude interference-type noise.” Analog Dialogue, 17(1), 1983.
- [48] Henry W. Ott. Electromagnetic Compatibility Engineering. Wiley, 2009.
- [45] MEDTEQ. CMRR testing (IEC 60601-2-25, -2-27, -2-47). 2017. https://medteq.squarespace.com/article/cmrr-testing-iec-60601-2-25-2-27-2-47
- [46] MEDTEQ. IEC 60601-2-25 clause 201.12.4.103: input impedance. 2017. https://medteq.squarespace.com/article/2017/4/1/iec-60601-2-25-clause-201124103-input-impedance
- [41] International Electrotechnical Commission. IEC 60601-1: Medical electrical equipment – Part 1: General requirements for basic safety and essential performance. 2005. Edition 3 with amendments 1 (2012) and 2 (2020).
- [42] International Electrotechnical Commission. IEC 60601-2-25: Particular requirements for the basic safety and essential performance of electrocardiographs. 2011.
- [43] International Electrotechnical Commission. IEC 60601-2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment. 2011.
- [44] International Electrotechnical Commission. IEC 60601-2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems. 2012.
- [39] Sohee Kim, Prashant Tathireddy, Richard A. Normann and Florian Solzbacher. “Thermal impact of an active 3-D microelectrode array implanted in the brain.” IEEE Transactions on Neural Systems and Rehabilitation Engineering, 15(4):493–501, 2007.
E.4Low-noise amplifiers
The micropower instrumentation amplifier, the capacitive-feedback neural amplifier and the chopped readout ASIC that Part II builds on, and two analog design texts (Chapters 5–12).
- [14] Michiel S. J. Steyaert and Willy M. C. Sansen. “A micropower low-noise monolithic instrumentation amplifier for medical purposes.” IEEE Journal of Solid-State Circuits, 22(6):1163–1168, 1987.
- [15] Reid R. Harrison and Cameron Charles. “A low-power low-noise CMOS amplifier for neural recording applications.” IEEE Journal of Solid-State Circuits, 38(6):958–965, 2003.
- [17] Refet Firat Yazicioglu, Patrick Merken, Robert Puers and Chris Van Hoof. “A 60 µW 60 nV/√Hz readout front-end for portable biopotential acquisition systems.” IEEE Journal of Solid-State Circuits, 42(5):1100–1110, 2007.
- [13] Behzad Razavi. Design of Analog CMOS Integrated Circuits, 2nd edition. McGraw-Hill, 2017.
- [4] SkillSurf. The Art of Analog IC Design. 2025. https://www.skillsurf.org/art_of_aicd/
E.5Data converters
Nyquist and oversampled converters, the survey of published converters, and open-source SAR designs and ΔΣ tools (Chapters 13–22).
- [9] Marcel J. M. Pelgrom. Analog-to-Digital Conversion, 3rd edition. Springer, 2017.
- [10] Richard Schreier, Gabor C. Temes and Shanthi Pavan. Understanding Delta-Sigma Data Converters, 2nd edition. Wiley-IEEE Press, 2017.
- [22] Boris Murmann. ADC Performance Survey 1997–2024. 2024. https://github.com/bmurmann/ADC-survey
- [24] Manuel Moser and Harald Pretl. SKY130_SAR-ADC1: a fully differential asynchronous non-binary 12-bit SAR ADC in SKY130. 2024. https://github.com/iic-jku/SKY130_SAR-ADC1
- [26] Manuel Moser and Harald Pretl. An open-source 12-bit non-binary SAR ADC (talk at TWEPP 2024). 2024. https://indico.cern.ch/event/1381495/contributions/5988502/
- [27] Giuseppe Venturini et al. python-deltasigma: a Python port of R. Schreier’s Delta Sigma Toolbox. 2016. https://github.com/ggventurini/python-deltasigma
E.6Biosignal processing and systems
Digital processing of biosignals, the QRS detector of Chapter 24 and a seizure-detection SoC (Chapters 23–28).
- [28] Willis J. Tompkins (ed.). Biomedical Digital Signal Processing. Prentice Hall, 1993.
- [29] Jiapu Pan and Willis J. Tompkins. “A real-time QRS detection algorithm.” IEEE Transactions on Biomedical Engineering, BME-32(3):230–236, 1985.
- [25] Naveen Verma et al. “A micro-power EEG acquisition SoC with integrated feature extraction processor for a chronic seizure detection system.” IEEE Journal of Solid-State Circuits, 45(4):804–816, 2010.
E.7Open data
The recordings used by the labs, and the library that reads them.
- [5] Ary L. Goldberger et al. “PhysioBank, PhysioToolkit, and PhysioNet: components of a new research resource for complex physiologic signals.” Circulation, 101(23):e215–e220, 2000.
- [30] George B. Moody and Roger G. Mark. “The impact of the MIT-BIH Arrhythmia Database.” IEEE Engineering in Medicine and Biology Magazine, 20(3):45–50, 2001. Data: https://physionet.org/content/mitdb/1.0.0/.
- [31] George B. Moody, W. K. Muldrow and Roger G. Mark. “A noise stress test for arrhythmia detectors.” In Computers in Cardiology, 1984. Data: https://physionet.org/content/nstdb/1.0.0/.
- [32] Ali H. Shoeb. Application of Machine Learning to Epileptic Seizure Onset Detection and Treatment. PhD thesis, Massachusetts Institute of Technology, 2009. CHB-MIT Scalp EEG Database: https://physionet.org/content/chbmit/1.0.0/.
- [6] Manfredo Atzori et al. “Electromyography data for non-invasive naturally-controlled robotic hand prostheses.” Scientific Data, 1:140053, 2014. Data: https://ninapro.hevs.ch.
- [40] MIT Laboratory for Computational Physiology. WFDB Python: a library of tools for reading, writing and processing PhysioNet signals and annotations. 2025. https://github.com/MIT-LCP/wfdb-python
E.8Open-source silicon
The PDK, the tools, the chip template and the designs already taped out on IHP’s open shuttles (Chapter 30).
- [1] IHP GmbH. IHP-Open-PDK: SG13G2 130 nm SiGe BiCMOS open-source process design kit. 2026. https://github.com/IHP-GmbH/IHP-Open-PDK
- [2] Institute for Integrated Circuits and Quantum Computing, JKU Linz. IIC-OSIC-TOOLS: an all-in-one container for open-source analog and digital chip design. 2026. https://github.com/iic-jku/IIC-OSIC-TOOLS
- [11] Simon Dorrer and Harald Pretl. A tutorial on open-source analog-mixed-signal chip design with the ihp-sg13g2 Open-PDK (ihp-sg13g2-ams-chip-template). 2026. https://github.com/iic-jku/ihp-sg13g2-ams-chip-template
- [34] IHP GmbH. IHP-Open-DesignLib: open-source designs taped out on the IHP OpenMPW shuttles. 2026. https://github.com/IHP-GmbH/IHP-Open-DesignLib
- [23] IHP GmbH. IHP-AnalogAcademy: hands-on analog and mixed-signal design modules for SG13G2, including an 8-bit synchronous SAR ADC. 2026. https://github.com/IHP-GmbH/IHP-AnalogAcademy
- [3] Open-SERDES Project, BRICD. Designing a Serial Link from Scratch: The Open-SERDES Tutorial. 2026. https://www.thebricd.org/serdes-tutorial/
E.9How this tutorial is made
This tutorial, its figures and its lab code were developed with the help of AI tools, and this draft may contain mistakes. If you find an error, an unclear derivation or a figure that does not explain what it should, please email bricd.org@gmail.com or open an issue on GitHub, and we will correct it.