Appendix BTables and Constants

Table B.1 converts a target BER into the Gaussian multiplier \(Q\), and Table B.2 converts loss in decibels into voltage and power ratios. Table B.3 collects the constants used in the examples.

Table B.1. BER against \(Q\), with \(\mathrm{BER}=Q(Q)\).

BER \(Q\) \(2Q\) (eye/\(\sigma\))
\(10^{-3}\) 3.090 6.18
\(10^{-4}\) 3.719 7.44
\(10^{-5}\) 4.265 8.53
\(10^{-6}\) 4.753 9.51
\(10^{-7}\) 5.199 10.40
\(10^{-8}\) 5.612 11.22
\(10^{-9}\) 5.998 12.00
\(10^{-10}\) 6.361 12.72
\(10^{-11}\) 6.706 13.41
\(10^{-12}\) 7.034 14.07
\(10^{-13}\) 7.349 14.70
\(10^{-14}\) 7.651 15.30
\(10^{-15}\) 7.941 15.88

Table B.2. Decibels to ratios (loss).

Loss (dB) Voltage ratio Power ratio
0.5 0.944 0.891
1 0.891 0.794
3 0.708 0.501
6 0.501 0.251
10 0.316 0.100
12 0.251 0.0631
14 0.200 0.0398
17.4 (REF) 0.135 0.0182
20 0.100 0.0100
30 0.0316 0.00100
40 0.0100 0.000100
Table B.3. Handy constants and Open-SERDES conversions (at \(T=300\) K where it matters).
Quantity Value Use
Boltzmann constant \(k\) \(1.381\times10^{-23}\) J/K noise
Elementary charge \(q\) \(1.602\times10^{-19}\) C shot noise, \(V_T\)
Thermal voltage \(kT/q\) 25.85 mV HBT \(g_\mathrm{m}=I_C/V_T\): 38.7 mS per mA
\(kT\) \(4.14\times10^{-21}\) J = \(-173.8\) dBm/Hz noise floors
\(\sqrt{4kTR}\), \(R=50\,\Omega\) 0.91 nV/\(\sqrt{\mathrm{Hz}}\) termination noise
\(\sqrt{kT/C}\), \(C=50\) fF 0.29 mV sampled noise
Vacuum permittivity \(\varepsilon_0\) \(8.854\times10^{-12}\) F/m capacitance
Speed of light \(c\) \(2.998\times10^8\) m/s line delay
FR-4 (\(\varepsilon_r=4\)): \(v=c/2\) \(1.50\times10^8\) m/s = 6.67 ps/mm = 169 ps/in reflections, flight time
1 UI at 5 Gb/s 200 ps everything
1 degree of the 2.5 GHz clock 1.11 ps I/Q and PI errors
1 PI step 6.25 ps = 0.031 UI CDR

Generated from book/tutorial/chapters/A_appendices.tex. Figure, table and equation numbers match the PDF edition.


Back to top

BRICD · Biomedical Research in Integrated Circuit Design · Open-SERDES Tutorial, draft v0.1 (October 2026). This site is generated from the LaTeX book; the PDF edition has the same numbering.

This tutorial was written with the help of AI tools and may contain mistakes. If you find one, please email bricd.org@gmail.com or open an issue, and we will correct it.