Appendix AFormula Sheet

The equations of this tutorial on two pages, in the notation of Chapter 1: \(T_\mathrm{b}\) = 1 UI = 200 ps, \(f_\mathrm{N}=2.5\) GHz, symbols \(a_k=\pm1\), TX levels \(\pm A\) with \(A=0.5\) V, cursors \(p_k\) of a 1 V, 1-UI pulse.

Formula Meaning
Signals and BER (Chapters 2 and 4)
\(f_\mathrm{b}=1/T_\mathrm{b},\quad f_\mathrm{N}=1/(2T_\mathrm{b})\) bit rate and Nyquist frequency: 5 Gb/s, 2.5 GHz
\(y(t)=A\sum_n a_n\,p(t-nT_\mathrm{b})+n(t)\) received signal: superposition of shifted pulse responses
\(p_k=p(t_\mathrm{s}+kT_\mathrm{b})\) cursors: \(p_0\) main, \(k<0\) pre-, \(k>0\) post-cursors
\(\mathrm{EH}=2A\big(p_0-\sum_{k\neq0}\lvert p_k\rvert\big)\) peak-distortion (worst-case) inner eye height
\(\mathrm{BER}=Q\!\left(\mathrm{EH}/2\sigma_\mathrm{n}\right),\ Q(x)=\tfrac12\operatorname{erfc}(x/\sqrt2)\) BER for Gaussian noise of rms \(\sigma_\mathrm{n}\) at the slicer
\(\mathrm{EH}\ge2Q\sigma_\mathrm{n}=14.07\,\sigma_\mathrm{n}\) eye needed for \(10^{-12}\) (\(Q=7.03\))
\(S(f)=A^2T_\mathrm{b}\,\mathrm{sinc}^2(fT_\mathrm{b})\) NRZ power spectral density; first null at \(f_\mathrm{b}\)
\(M=\mathrm{EH}_\mathrm{ISI}-2Q\sigma_\mathrm{n}-\Delta V_\mathrm{jit}-2V_\mathrm{os}-V_\mathrm{sens}\) linear voltage margin at the sampler
Channel (Chapter 3)
\(v=c/\sqrt{\varepsilon_r},\quad t_d=\ell/v\) propagation speed and delay; FR-4: 6.67 ps/mm
\(\Gamma=\frac{Z_L-Z_0}{Z_L+Z_0},\quad \mathrm{RL}=-20\log_{10}\lvert S_{11}\rvert\) reflection coefficient and return loss
\(\alpha_D\approx\pi f\sqrt{\varepsilon_r}\tan\delta/c\) dielectric loss (Np/m), grows as \(f\); skin loss grows as \(\sqrt f\)
\(\lvert S_{11}\rvert=x/\sqrt{4+x^2},\ x=\omega Z_0C_p\) pad capacitance on a doubly terminated node
\(f_\mathrm{3dB}=1/(\pi Z_0C_p)\) pad pole (node sees \(Z_0/2\))
\(\mathrm{IL}(f_\mathrm{N})-\mathrm{IL}(f_\mathrm{N}/2)>9.54\) dB PAM4 can win over NRZ only above this octave loss
Equalization (Chapters 6, 7 and 8)
\(y_n=\sum_k c_k x_{n-k},\quad\sum_k\lvert c_k\rvert=1\) TX FFE under the peak-swing constraint
\(\mathrm{DE}=20\log_{10}\frac{\lvert c_0\rvert+\lvert c_1\rvert}{\lvert c_0\rvert-\lvert c_1\rvert}\) de-emphasis of a 2-tap FFE (\(c_1=-0.25\): 6 dB)
\(H_\mathrm{CTLE}(s)=\frac{1}{A}\frac{1+s/\omega_z}{(1+s/\omega_{p1})(1+s/\omega_{p2})}\) CTLE model, peaking \(A=\omega_{p1}/\omega_z\)
\(A=1+g_\mathrm{m}R_S/2,\ \omega_z=\frac{1}{R_SC_S},\ \omega_{p2}=\frac{1}{R_DC_\mathrm{L}}\) degenerated differential pair
\(z_n=y_n-\sum_k w_k\hat d_{n-k},\quad w_k=A\,p_k\) DFE; zero-forcing taps equal the post-cursors
\(t_\mathrm{CK\to Q}+t_\mathrm{settle}+t_\mathrm{setup}\le T_\mathrm{b}\) DFE tap-1 timing (direct feedback)
\(w_k\leftarrow w_k+\mu\,\operatorname{sgn}(e_n)\,\operatorname{sgn}(\hat d_{n-k})\) sign-sign LMS adaptation
Formula Meaning
Circuits (Chapters 9 and 10)
\(\Delta V=I_TR_\mathrm{L},\ \tau=R_\mathrm{L}C_\mathrm{L},\ P=V_\mathrm{CC}I_T\) CML gate: swing, time constant, static power
\(V_{d,\mathrm{pp}}=I_TZ_0\) (CML), \(I=V_{d,\mathrm{pp}}/4Z_0\) (SST) driver current, doubly terminated
\(g_\mathrm{m}=I_C/V_T\); full switching at \(\approx4V_T\) HBT pair: 38.7 mS/mA, about 100 mV
\(\tau=C/g_\mathrm{m}\) (StrongARM), \(\tau=\frac{R_\mathrm{L}C}{g_\mathrm{m}R_\mathrm{L}-1}\) (CML) latch regeneration time constant
\(P_\mathrm{meta}=\frac{2V_L}{A\,\Delta V}\,e^{-T/\tau}\) metastability probability per decision
\(\sigma_{\Delta V_t}=A_{VT}/\sqrt{WL}\) Pelgrom mismatch (offset)
\(V_\mathrm{sens}\approx2Q\sigma_s+V_\mathrm{min}+2\lvert V_\mathrm{os,res}\rvert\) sampler sensitivity
\(\overline{v_n^2}=4kTR\,\Delta f,\quad v_{n,\mathrm{rms}}=\sqrt{kT/C}\) resistor and sampled (\(kT/C\)) noise
Jitter, PLL and CDR (Chapters 11, 12 and 13)
\(\mathrm{TJ}=\mathrm{DJ}_{\delta\delta}+2Q\,\sigma_\mathrm{RJ}\) total jitter at a BER (dual-Dirac)
\(\sigma_\phi^2=2\!\int\!\mathcal{L}(f)\,df,\quad\sigma_t=\sigma_\phi/(2\pi f_0)\) phase noise to rms jitter
\(\omega_n=\sqrt{\frac{I_\mathrm{CP}K_\mathrm{VCO}}{2\pi NC_1}},\ \zeta=\frac{R}{2}\sqrt{\frac{I_\mathrm{CP}K_\mathrm{VCO}C_1}{2\pi N}}\) CP-PLL natural frequency and damping
\(f_0=\frac{1}{2\pi\sqrt{LC}},\ R_p=Q\omega_0L,\ g_\mathrm{m}R_p/2\ge1\) LC tank and start-up
\(K_\mathrm{BB}=\mathrm{TD}\sqrt{2/\pi}/\sigma_\mathrm{j}\) bang-bang gain, linearized by jitter
\(S=K_P\cdot\mathrm{LSB}/T_\mathrm{upd},\ \mathrm{JTOL}\approx\mathrm{TM}+2S/\omega\) BB-CDR slew rate and slew-limited JTOL
\(\Delta t_\mathrm{PI}=T_\mathrm{clk}/N_\mathrm{steps},\ \text{dither}\approx2S\,T_\mathrm{lat}\) PI step (6.25 ps) and limit-cycle dither
Flow and test (Chapters 14 and 15)
\(E_b=P/f_\mathrm{b}\) energy per bit (216 mW \(\to\) 43 pJ/b)
\(N_\mathrm{bits}\ge3/\mathrm{BER}\) error-free bits for a BER claim at 95 % confidence
\(N\ge10\,\ell f_\mathrm{max}/v,\quad\Delta\hat\sigma/\sigma\approx1/\sqrt{2N}\) lumped-line sections; Monte Carlo accuracy

Generated from book/tutorial/chapters/A_appendices.tex. Figure, table and equation numbers match the PDF edition.


Back to top

BRICD · Biomedical Research in Integrated Circuit Design · Open-SERDES Tutorial, draft v0.1 (October 2026). This site is generated from the LaTeX book; the PDF edition has the same numbering.

This tutorial was written with the help of AI tools and may contain mistakes. If you find one, please email bricd.org@gmail.com or open an issue, and we will correct it.